Product Description
This extra-large ALED area light mounts on a 2-3/8 inch slipfitter and throws a Type III beam across parking lots, roadways, and other wide outdoor spaces. The 300-, 345-, and 385-watt output steps are field-selectable, so one SKU can be dialed in to the job after install — a direct replacement for a 1,500-watt metal halide at roughly a quarter of the energy.
The bronze die-cast aluminum housing carries a cool 5000K LED array that puts out up to 48,702 lumens at full output, with 85 CRI color rendering. Runs on standard 120-277V input, with 0-10V dimming and with a built-in WattStop multi-level motion sensor on a 40-foot lens pattern, dimming the fixture back when the detection area is empty and bringing it to full output when motion returns.
Features
-
Wattage: Field-selectable 300W, 345W, or 385W (factory default 385W)
-
Light Output: Up to 48,702 lumens at the 385W step
-
Color Temperature: 5000K (Cool)
-
CRI: 85
-
Replaces: 1,500W metal halide
-
Distribution: Type III, for roadway and parking-perimeter coverage
-
Mount: 2-3/8" slipfitter with stainless steel hardware
-
Tilt: Rotates in 5-degree increments
-
Input Voltage: 120-277V, 50/60 Hz
-
Dimming: 0-10V, down to 10%
-
Controls: Built-in WattStop multi-level motion sensor, 40-foot lens pattern, for occupancy-based dimming across larger coverage zones
-
Surge Protection: 10 kV line-to-line, 6 kV line-to-ground
-
Lens: Polycarbonate
-
Housing: Die-cast aluminum, Bronze finish
-
Lifespan: 100,000 hours (L70)
-
Weight: 41.4 lbs
Ideal For: Parking Lots • Roadways • Service Drives • Loading Zones • Industrial Yards
UL Listed for wet locations with IP66 ingress protection. Cold-starts down to -40°F and rated for ambient temperatures up to 104°F. Carries a 3G vibration rating per ANSI C136.31.
