Product Description
This small ALED area light mounts directly to a wall or vertical building surface in a bronze housing, throwing broad, controlled light across loading zones, service drives, and perimeter areas without requiring a pole. Field-selectable 40W, 60W, or 80W output and a Type V distribution let one fixture cover a wide 360° area with even brightness on the surrounding ground.
The 4000K neutral white strikes a balance between warm and cool, pulling clean color out of signage, pavement markings, and surrounding architecture without the blue cast of pure daylight. A WattStopper FSP-301 motion sensor ships pre-wired and factory-set for a 20-foot detection diameter, cutting power during unoccupied hours without a separate control circuit. The bronze finish pairs with brick, stone, and standard architectural trim without pulling attention away from the building itself.
Features
-
Wattage: Field-selectable 40W / 60W / 80W (factory default 80W)
-
Lumen Output: 6,353 lumens at 40W, 8,746 lumens at 60W, 11,760 lumens at 80W
-
Efficacy: 139.3 to 150.9 lumens per watt
-
Color Temperature: 4000K Neutral White
-
CRI: 82
-
L70 Lifespan: 100,000 hours
-
Distribution: Type V (wide symmetric 360°)
-
Replaces: 250W metal halide
-
Input Voltage: 120-277V multi-volt
-
Surge Protection: 10kV line-to-line, 6kV line-to-ground
-
Housing: Die-cast aluminum with high-durability finish
-
Finish: Bronze
-
Mount: Wall-mount bracket for vertical building surfaces
-
Controls: WattStopper FSP-301 motion sensor pre-wired and set to a 20-foot detection diameter; 0-10V dimmable, dims to 10%
Ideal For: Loading Zones • Service Drives • Perimeter Lighting • Industrial Yards • Wall Pack Replacement
UL Listed for wet locations. IP66 rated against dust and water ingress. Cold-start to -40°F, operates to a 104°F maximum ambient. 3G vibration rated per ANSI C136.31.
