Product Description
This small ALED T2 area light mounts on a universal arm at the top of a pole in parking lots, service drives, and pedestrian walkways, spreading a Type II distribution along the roadside where light is needed and cutting spill where it isn't. Field-adjustable output at the fixture lets one SKU cover three wattages — 80W, 60W, or 40W — so a contractor can stock fewer models and set the output at install.
The 4000K neutral white output stays warm and comfortable without going yellow, easy on the eyes in walkways and gathering areas where people spend time, and holds 82 CRI, and the black die-cast aluminum housing matches modern black poles and low-profile site hardware. A factory-installed WattStopper motion sensor with a 180-degree field of view holds the fixture at a lower level until it detects motion, then ramps to full output — cutting off-hours energy while keeping the site lit for people and vehicles.
Features
-
Wattage: 80W / 60W / 40W field-selectable (factory default 80W)
-
Light Output: 10,637 lumens at 80W, 7,911 lumens at 60W, 5,746 lumens at 40W
-
Color Temperature: 4000K neutral white
-
CRI: 82
-
Distribution: Type II
-
Voltage: 120-277V
-
Dimming: 0-10V, down to 10%
-
Controls: Integral WattStopper motion sensor, 180-degree detection, field-configurable via handheld remote
-
Mount: Universal slip-lock arm for hole spacing from 1 inch to 3 inch center to center; round pole adapter plate included
-
Finish: Black die-cast aluminum
-
Rating: IP66, UL wet location listed
-
Cold Start: -40°F (-40°C)
-
Surge Protection: 10 kV line-to-line, 6 kV line-to-ground
-
Lifespan: 100,000 hours (L70)
-
Replaces: 250W metal halide
Ideal For: Parking Lots • Service Drives • Loading Zones • Pedestrian Walkways • Campus Grounds
UL listed for wet locations, IP66 rated for dust and water, and rated to start down to -40°F for northern climates.
