Product Description
This medium ALED area light slides onto a 2-3/8 inch slipfitter tenon and locks in with stainless steel hardware, casting a wide 360 degree Type V pattern that blankets parking lots, corporate campuses, and retail sites without leaving pools of shadow between poles.
The 3000K warm white output stays gentle against skylines and adjacent residential windows, which suits properties near neighborhoods, resorts, and dark-sky-conscious municipalities. The white housing keeps the fixture visually quiet against pale poles and light-colored building facades. Native 480V input feeds long pole runs directly on large commercial and industrial sites, cutting the voltage-drop losses that come with stepping 480V down to 277V at each fixture. The included WattStop multi-level motion sensor uses a 180 degree hard-lens field of view and a 20 foot lens to cut output automatically during unoccupied hours and step back up when it detects a person or vehicle entering the coverage zone, trimming off-hours energy on lots that go quiet late at night.
Features
-
Field-Selectable Wattage: Choose 150W, 90W, or 78W on the driver at install time (factory default 150W), so one SKU covers three light levels across the site.
-
Lumen Output: 20,749 lumens at 150W, 13,754 lumens at 90W, 11,349 lumens at 78W, using just 150, 90, or 78 watts respectively.
-
Color Temperature: 3000K warm white, replacing a 400W metal halide fixture with far less energy and no warm-up time.
-
Color Rendering: 81 CRI for accurate color on signage, uniforms, and vehicle finishes.
-
Distribution: Type V symmetric pattern spreads light evenly in every direction, ideal for pole-mount coverage of wide-open parking areas.
-
Voltage: 480V input, 50/60 Hz.
-
0-10V Dimming: Wired for a separate 0-10V DC dimming circuit and dims down to 10 percent output.
-
Surge Protection: 10kV line-to-line and 6kV line-to-ground protect the driver against nearby lightning strikes and utility transients.
-
Motion Sensor: WattStop multi-level motion sensor with a 180 degree hard-lens field of view and a 20 foot lens, adjustable with the WSREM handheld wireless configuration tool (sold separately).
-
Mount: 2-3/8 inch slipfitter with stainless steel hardware; rotates in 5 degree increments for on-site aiming.
-
Housing: Die-cast aluminum with a high-durability white finish and high-temperature silicone gaskets sealing every joint.
-
Lens: Polycarbonate with an aluminum reflector and white polycarbonate secondary optics for consistent uniformity.
-
Rated Life: 100,000 hours L70, projected from IES LM-80 test data using TM-21 calculations.
Ideal For: Hospitality Properties • Resort Grounds • Residential-Adjacent Lots • Dark-Sky Communities • Campus Walkways
UL Listed for wet locations, IP66 sealed against dust and driving rain, rated for cold starts down to -40°F and ambient temperatures up to 104°F at full 150W output, and tested to 3G vibration per ANSI C136.31 for pole-mount applications.
