Skip to content
Save Big with Volume Pricing Discounts
Save Big with Volume Pricing Discounts
RAB ALED 78W-90W-150W Type IV 5000K Wall Mount 7-Pin Receptacle Bronze (ALEDM4TWM/7PR)

RAB ALED 78W-90W-150W Type IV 5000K Wall Mount 7-Pin Receptacle Bronze (ALEDM4TWM/7PR)

SKU ALEDM4TWM/7PR
by RAB
$1,004.00 - $1,004.00
$1,004.00
Backorder: Usually Ships in 4-7 Days
Product Description

This ALED Medium area light mounts directly to a wall or vertical building surface, throwing broad, controlled light across parking areas, service drives, and loading zones without requiring a pole. The Type IV distribution pushes a semicircular pattern forward from the wall, keeping backlight off the building and putting the useful output where trucks, carts, and foot traffic actually move.

Field-adjustable output steps between 150W, 90W, and 78W on the housing, so the same fixture can be dialed to match the light-level requirement of a specific loading bay or perimeter wall. Wired for 120-277V multi-tap service, it delivers up to 19,204 lumens at the 150W setting — roughly the useful output of a 400W metal halide fixture, using far less energy. A 7-pin ANSI C136.41 receptacle on the housing takes external photocells or NEMA network controls, letting the fixture tie into a site's timing scheme or a building-management system.

Features

  • Field-Adjustable Wattage: 150W / 90W / 78W selectable on the housing (factory default 150W)
  • Light Output: Up to 19,204 lumens at the 150W setting; equivalent to a 400W metal halide fixture
  • Color Temperature: 5000K (Cool), 85 CRI
  • Distribution: Type IV semicircular pattern for wall-mounted perimeter lighting
  • Input Voltage: 120-277V multi-tap, 50/60 Hz
  • Dimming: 0-10V dimming driver, dims to 10 percent (requires separate 0-10V control circuit)
  • Controls Receptacle: 7-pin ANSI C136.41 receptacle for external photocells and NEMA network controls (sold separately)
  • Mounting: Direct wall mount
  • Housing & Lens: Die-cast aluminum housing, polycarbonate lens, aluminum reflector with white polycarbonate
  • Ingress Protection: IP66 rated for dust and water; high-temperature silicone gaskets
  • Surge Protection: 10 kV line-to-line, 6 kV line-to-ground
  • Cold-Weather Start: Rated down to -40°F (-40°C)
  • Lifespan: 100,000-hour L70 based on IES LM-80 data and TM-21 calculations
  • Finish: Bronze

Ideal For: Parking Areas • Service Drives • Loading Zones • Building Perimeters • Wall Pack Replacement

UL Listed for wet locations; IP66 rated. Requires a separate 0-10V control circuit for dimming. Factory shipped at 150W; wattage step selection is made on the housing at install.

Frequently Asked Questions
How bright is this product?
This product offers 10610/12625/19204 Selectable lumen options and features variable output allowing the brightness level to be adjusted for greater flexibility.
What color temperature is this product?
This product has a color temperature of 5000K producing bright white light that enhances clarity and detail.
What voltage does this product operate on?
This product operates on 120V-277V and is compatible with a wide range of standard residential and commercial electrical systems. Always consult with an electrician regarding your specific voltage requirements.
Is this product dimmable?
This product features 0-10V dimming and requires a compatible 0-10V dimming control system, commonly used in commercial lighting applications. Make sure to confirm the dimmer's compatibility with the manufacturer.
Is this product DLC listed and eligible for rebates?
This product is DLC Premium listed, meaning it meets enhanced DesignLights Consortium (DLC) performance criteria and is typically eligible for higher-tier utility rebate programs depending on local utility guidelines. Consult with your local energy company to confirm DLC compatibility and programs.
What is the CRI and how does it affect light quality?
This product has a CRI of 85, delivering good color accuracy with natural, balanced color rendering. Colors will appear clear and consistent under this light.