RAB ALED Field Adjustable Area Light 78W/90W/150W Type III 3000K Pole Mount Wattstopper Sensor 20 Foot Lens Bronze (ALEDM3TY/WS2)

This medium ALED area light mounts to a pole or wall through its universal slide-and-lock arm, delivering broad 3000K warm-white coverage across parking lots, campus roadways, and commercial yards. A Type III forward-throw distribution spreads the beam outward from the pole line, filling general parking areas and drive lanes from a single high-output fixture. The bronze die-cast aluminum housing blends into standard commercial pole finishes and keeps a low visual profile against masonry and concrete.

Standard 120-277V multi-tap operation matches the wiring commonly available at commercial building walls and pole circuits. An integrated multi-level motion sensor with a 180-degree detection pattern dims the fixture when the area empties and brings it back to full output when motion is picked up, cutting off-hours energy while keeping the site lit for security. The sealed sensor case is vandalproof, rainproof, and bugproof.

Features

• Field-Adjustable Output: select 78W, 90W, or 150W at install (150W factory default) — one SKU covers three pole-power targets
• Output at 150W: 19,524 lumens at 132.5 lumens per watt, 82 CRI, 3-step MacAdam Ellipse color consistency
• Replaces: 400W metal halide
• Housing: die-cast aluminum with polycarbonate lens, high-temperature silicone gaskets, IP66 rated for dust and water
• Dimming: 0-10V standard, dims to 10% (separate 0-10V DC circuit required)
• Cold-Weather Start: -40°F (-40°C) minimum starting temperature; 3G vibration rating per ANSI C136.31
• Motion Control: integrated multi-level occupancy sensor, 180° detection pattern, sealed vandalproof enclosure

Ideal For: Parking Lots • Roadways • Commercial Campuses • Auto Dealerships • Distribution Yards • General Area Lighting

UL Listed for wet locations. Dark Sky Approved — conforms to the International Dark-Sky Association fully-shielded fixture requirement, emitting no light above 90 degrees. Requires 0-10V dimming circuit for dimming control.