Product Description
This large ALED area light mounts directly to a wall or vertical building surface, throwing broad, controlled light across parking areas, service drives, and loading zones without requiring a pole.
The 5000K cool color temperature produces bright, clean daylight for security-focused applications where clarity matters and cameras need crisp contrast. Black finish reads modern and disappears at night, drawing no attention to the fixture itself so the light is what shoppers or drivers notice, not the housing. Field-adjustable output covers three wattage tiers on one SKU, so a single fixture works for full parking-lot output, mid-brightness perimeter runs, or lower-light walkway spillover — and one part number spans replacement scenarios that used to need three separate SKUs.
Wired for 120-277V multi-tap operation, with a 0-10V dimming driver that runs down to 10% standard. A WattStopper multi-level motion sensor with a 20-foot lens is factory-mounted; the fixture holds full output when the area is active and steps down during off-hours, cutting energy while keeping the site lit.
Features
-
Wattage: Field-selectable 150W / 90W / 78W in three discrete steps (150W factory default)
-
Light Output: Up to 19,192 lumens at the 150W setting
-
Color Temperature: 5000K (cool white)
-
Color Rendering: 85 CRI
-
Optic: Type III distribution — throws light outward from the mounting point, ideal for roadway edges, general parking, and applications needing a broad, evenly-spread pool of light
-
Wattage Equivalency: Replaces a 400W metal halide fixture
-
Voltage: 120-277V, 50/60 Hz
-
Dimming: 0-10V dimming down to 10% (requires separate 0-10V DC dimming circuit)
-
Motion Sensor: Factory-mounted WattStopper multi-level motion sensor with 20-foot lens and 180° detection pattern
-
Mounting: Direct wall-mount arm for mounting to vertical surfaces
-
Housing & Finish: Die-cast aluminum housing in a durable black finish, with polycarbonate lens and high-temperature silicone gaskets
-
LED Lifespan: 100,000 hours (L70) based on IES LM-80 and TM-21 calculations
-
Ingress Protection: IP66 rated for dust and water intrusion
-
Cold-Weather Starting: Reliable starting down to -40°F / -40°C
-
Surge Protection: 10 kV line-to-line, 6 kV line-to-ground
-
Vibration Rating: 3G per ANSI C136.31
Ideal For: Parking Areas • Service Drives • Loading Zones • Building Perimeters • Security Applications • Wall Pack Replacement
UL Listed and suitable for wet locations.
