Product Description
This ALED medium-housing area light mounts to a 2-3/8 inch round pole tenon and delivers Type 3 distribution — a broad, forward-throwing pattern designed to fill parking lots, service drives, and commercial sites from pole positions along the edge of the area. Field-adjustable output steps between 78W, 90W, and 150W (150W factory default), so one SKU covers a range of light-level targets, and at the top setting the fixture replaces a 400-watt metal halide while running on a fraction of the energy.
Wired for 480V service, it matches the higher-voltage feeds common on industrial sites, large commercial buildings, and long pole runs where 480V reduces wire size and voltage drop. A WattStopper multi-level motion sensor is built in, with a 180-degree detection field and a sealed lens rated for outdoor use — it cuts off-hours energy while keeping the site lit when someone approaches, and settings adjust from the ground with the WSREM handheld wireless configuration tool. The black finish sits on a die-cast aluminum housing formulated for high-durability outdoor exposure, and the 3000K color temperature produces a warm white that softens the visual impact on adjacent buildings and residential frontage.
The 3000K color point meets Dark Sky requirements and carries LUNA 5.1 qualification, making this variant a fit for coastal municipalities with sea-turtle lighting ordinances, dark-sky communities, and campuses adjacent to observatories or residential neighborhoods where light pollution is a permitting factor.
Features
-
Wattage: Field-adjustable 78W / 90W / 150W (150W factory default); replaces a 400-watt metal halide at top setting
-
Light Output: Up to 19,123 lumens at the 150W setting; field-adjustable to 90W and 78W steps
-
Color Temperature: 3000K (warm white)
-
Color Accuracy: Up to 81 CRI
-
Input Voltage: 480V
-
Controls: Integrated WattStopper multi-level motion sensor, 180-degree detection, wireless configuration via WSREM tool; 0-10V dimming standard
-
Distribution: IES Type 3 (forward throw for perimeter pole mounting)
-
Mounting: 2-3/8 inch slipfitter for round pole tenons; stainless steel hardware; rotates in 5-degree tilt increments
-
Ingress Protection: IP66 (dust-tight, protected against powerful water jets)
-
Surge Protection: 10kV line-to-line, 6kV line-to-ground
-
Cold Weather Starting: -40°F minimum
-
Vibration Rating: 3G per ANSI C136.31 (bridge and roadway rated)
-
Lifespan: 100,000-hour L70 rated life
-
Housing / Lens: Die-cast aluminum housing, polycarbonate lens, high-temperature silicone gaskets
-
Finish: Black
-
Weight: 17.8 pounds
Ideal For: Coastal Municipalities • Dark-Sky Communities • Campus Grounds • Residential-Adjacent Parking • Municipal Sites • Sea-Turtle Lighting Ordinance Areas
UL Listed and suitable for wet locations. Mounts to a 2-3/8 inch round horizontal pole tenon; pole and mounting arm sold separately.
