(M-F 7am-5pm ET)
M-F 7am-4:30pm ET
This medium-housing ALED area light mounts on a horizontal arm to a square pole or wall bracket, casting a controlled Type II distribution across parking lots, service drives, wide walkways, and entrance roadways at up to 19,864 lumens. Three factory-programmed wattage settings — 78W, 90W, and 150W — are selectable in the field, so a single fixture can be tuned to the site's actual light-level target after install and replaces a 400W metal halide with a fraction of the energy draw.
This variant is pre-configured for 480V input, matching the high-voltage service common at industrial complexes, large distribution centers, and big-box commercial sites where 480V feeds cut wire size and voltage drop across long pole runs. The top of the housing is closed, leaving the fixture ready for a separately specified photocell or wall-switched circuit for automatic dusk-to-dawn operation. The 4000K neutral color temperature gives a softer, warmer appearance than daylight-cool while still rendering colors and surface details accurately for mixed pedestrian and vehicle areas. The bronze finish is the standard commercial specification for parking-lot and site lighting, disappearing against brick, stone, and darker architectural elements.
Features
Ideal For: Parking Lots • Service Drives • Loading Zones • Entrance Roadways • Wide Walkways • Commercial Site Lighting
UL listed for wet locations, IP66 rated for dust and water ingress, 3G vibration rated per ANSI C136.31, cold-start rated to -40°F, and rated for ambient temperatures up to 104°F.