Product Description
This large ALED area light mounts directly to a wall or vertical building surface, throwing broad, controlled light across parking areas, service drives, and loading zones without requiring a pole.
Field-adjustable wattage lets a contractor set the fixture to 170, 220, or 260 watts on site, so one fixture can be tuned to the pole height and lumen target of the property. At the top setting it replaces a 1,000-watt metal halide fixture while using roughly a quarter of the energy.
A factory-installed WattStopper multi-level motion sensor with a 20-foot lens dims the fixture when the area is empty and brings it back to full output when motion is detected, cutting energy use on service drives and low-traffic zones without a separate control system.
Features
- Field-adjustable output: 170W / 220W / 260W (factory default 260W)
- Lumen output: 25,350 / 32,559 / 37,708 lumens across the three power settings
- 5000K cool white, 84 CRI
- Equivalent to a 1,000W metal halide fixture
- Type IV distribution for building-side and parking-perimeter throw
- 0-10V dimmable to 10 percent
- 120-277V multi-tap driver
- Factory-installed WattStopper multi-level motion sensor with a 20-foot lens for short-range detection
- Direct wall-mount bracket for building-surface installation
- Die-cast aluminum housing with a polycarbonate lens; bronze finish
- 100,000-hour L70 LED lifespan
- 10-year, no-compromise warranty
Ideal For: Building Exteriors • Parking Structures • Loading Zones • Service Entrances • Wall Pack Replacement • Warehouse Perimeters
UL Listed for wet locations. IP66 rated for dust and water. Cold-start to -40°F, max ambient of 104°F. 3G vibration rating per ANSI C136.31.
