Product Description
This large ALED area light mounts directly to a wall or vertical building surface, throwing broad, controlled Type III light across parking areas, service drives, and loading zones without requiring a pole. It is a full area light configured for wall installation, not a wall pack — the same optics and output that pole-mounted ALEDs produce, aimed from the building face.
Wattage is field-adjustable at the fixture in three discrete steps — 170, 220, or 260 watts, with 260 watts as the factory default — so the same fixture covers a range of site conditions and can be dialed back after commissioning without swapping hardware. At the top step, output reaches 37,050 lumens at 138.1 lumens per watt, replacing a 1,000-watt metal halide with a fraction of the wattage. The 4000K neutral color temperature is warmer than a typical roadway cool white, easier on the eye and better suited to sites where the parking area sits next to a residential edge or a hospitality property. Standard multi-tap driver runs on 120-277 volts and dims to 10% on a 0-10V control circuit.
A factory-mounted Wattstop multi-level motion sensor sits under the housing with a 20-foot lens tuned for lower mounting heights — roughly wall-mount and low-pole applications up to about 20 feet. The 180-degree detection field holds the fixture at reduced output until motion enters the zone, then ramps to full output for the duration of the event, cutting run-time energy without leaving the area dark.
Features
- Field-adjustable 170W/220W/260W output, factory default 260W
- Type III distribution, up to 37,050 lumens at 138.1 lm/W, 4000K neutral white, 84/85/85 CRI
- Direct wall mount to vertical building surface
- 120-277V multi-tap driver, 0-10V dimming to 10%
- Factory-mounted Wattstop multi-level motion sensor, 20-foot lens, 180° detection
- 10kV line-to-line and 6kV line-to-ground surge protection
- Die-cast aluminum housing with polycarbonate lens, durable bronze finish
- 100,000-hour L70 LED lifespan, 10-year no-compromise warranty
Ideal For: Building Perimeter Lighting • Loading Docks • Service Drives • Warehouse Facades • Wall Pack Replacement
UL Listed for wet locations, IP66 ingress-protected against dust and water, rated for cold starts down to -40°F and ambient operation up to 104°F, and tested to a 3G vibration rating per ANSI C136.31. Backed by RAB's 10-year no-compromise warranty.
