RAB A22 Field Adjustable Area Light 70W/60W/50W 3000K/4000K/5000K Type 4 Pole Mount 7-Pin Receptacle Bronze (A22-4T70)

The A22 area light puts out 7,182-10,708 lumens of Type IV forward-throw illumination from a bronze pole-mount fixture wired for a multi-tap 120–277V input. Field-selectable wattage covers three replacement scenarios from a single unit: it replaces up to 350W metal halide or 200W high-pressure sodium at the 70W setting, and steps down through 60W (up to 250W metal halide or 200W high-pressure sodium) and 50W (up to 200W metal halide or 150W high-pressure sodium). A three-position CCT switch moves the output between 3000K warm white, 4000K neutral, and 5000K daylight so the fixture matches whatever lighting is already on the site.

Controls install through a 7-pin ANSI C136.41 receptacle on top of the housing, which ships with a shorting cap and accepts a photocontrol or wireless node sold separately. The adjustable slip-fitter arm fits a standard 2-3/8 inch round pole tenon, and the driver supports 0–10V dimming down to 10% for tie-in with existing lighting control panels.

Features

• Field-selectable 70W / 60W / 50W output with a 70W factory default
• Field-selectable 3000K / 4000K / 5000K color temperature with a 4000K factory default
• 7,182-10,708 lumens at 81-84 CRI, Type IV forward-throw distribution
• 0–10V dimming down to 10% on a 120–277V multi-tap input
• 7-pin ANSI C136.41 receptacle with shorting cap for photocontrols or wireless nodes
• Adjustable universal slip-fitter pole mount fits 2-3/8" round tenons
• Die-cast aluminum housing with polycarbonate lens, high-temperature silicone gaskets, and 6 kV surge protection

Ideal For: Small Parking Lots • Building Perimeters • Walkways • Retail Storefronts • Municipal Streets • Multi-Family Grounds

UL Listed for wet locations. IP66 rated for dust and water ingress, cold-start rated to –40°F, and suitable for ambient temperatures up to 104°F.