Product Description
A built-in microwave motion sensor rides on this A22 pole-mount area light, dropping output to 20% when the covered area is vacant and returning to full brightness when motion is detected. Underneath the sensor, the fixture delivers Type II photometrics across walkways, entrance roads, bike paths, and long, narrow parking zones — with output field-selectable on the driver at 100W, 80W, or 60W and CCT selectable on the fixture between 3000K, 4000K, and 5000K.
The white die-cast aluminum housing seals to IP66, and the polycarbonate lens sits behind high-temperature silicone gaskets rated for full outdoor exposure. Sensor sensitivity, hold time, and standby dim levels adjust with the MSR1 remote (sold separately). Cold-start operation to -40°F, a maximum ambient rating of 104°F, and 6 kV surge protection cover climate and utility conditions on most job sites. Runs on 120-277V input.
Features
- Built-in microwave motion sensor (MVS): 50 ft mounting height, 50 ft diameter detection at 50 ft
- Default 20-minute hold time on high sensitivity; standby dims to 20%
- Sensor settings adjustable via MSR1 remote (sold separately)
- Wattage selectable on the driver: 100W, 80W, or 60W (factory default 100W)
- CCT selectable on the fixture: 3000K, 4000K, or 5000K (factory default 4000K)
- 9,048 to 14,572 lumens at 130.5 to 161.8 lm/W efficacy
- 80-84 CRI, 100,000-hour L70 rated life
- Replaces up to 400W metal halide or 310W HPS at the 100W setting
- White die-cast aluminum housing, polycarbonate lens, silicone gaskets
- IP66 dust and water ingress rating
- 6 kV surge protection, 0-10V dimming to 10%
- Type II distribution, BUG rating B2 U0 G2 at the 100W setting
- 120-277V input, cold-start -40°F, maximum ambient 104°F
Ideal For: Parking Lots • Entrance Roadways • Walkways • Loading Docks • Municipal Sites
UL Listed for wet locations. Suitable for mounting within 4 ft (1.2 m) of the ground. IP66 ingress protection. Cold-start rated to -40°F, maximum ambient 104°F.
