Halco S14RED1C/LED 1.4W LED S14 120V Medium E26 Base Dimmable Red Bulb (80517)

Halco S14RED1C/LED 1.4W LED S14 120V Medium E26 Base Dimmable Red Bulb (80517)

Dimmable 120V Lamps Should Only Be Used On 120V Circuits. Lamps Are Designed For Use With An Analog Dimmer And These Products May Not Be Compatible With All Dimming Devices. Lamps Should Be Tested In The Application Prior To Full Installations On Circuits Using Such Devices. Not For Use On Timing Devices, Photosensors, Digital Dimmers Or Occupancy Sensors. Ensure Minimum Dimmer Load Is Met For Best Performance. Caution: Risk Of Electric Shock. Never Disassemble Or Modify The Bulb, No User Serviceable Parts Inside. To Avoid Burns, Do Not Touch The Bulb During Operation And Allow To Cool Completely After Switching Off. This Device Is Not Intended For Use In Emergency Exit Fixtures. This Device Complies With Part 18 Of The FCC Rules. This Product May Cause Interference With Other Devices. If Interference Occurs, Change The Location Of The Products Involved. Do Not Use In Totally Enclosed Fixtures Or IC Or ICAT Rated Recessed Cans. Dimmable Lamps Dim Down To 5%, But Are Limited By The Dimming Device Range. Ip65 Rated

Ideal LED solution for replacing Incandescent or Cold Cathode sign lamps. For outdoor signs and retail applications.

What color temperature is this product?

This product offers 3000-5000 Selectable color temperature options, allowing you to adjust the light output to your preferred tone from the available settings.

What voltage does this product operate on?

This product operates on 120V, the standard line voltage used in most residential and many commercial electrical systems. Always consult with an electrician regarding your specific voltage requirements.

Is this product dimmable?

This product is dimmable allowing the light output to be adjusted when used with a compatible dimmer. Make sure to confirm the dimmer's compatibility with the manufacturer.

Is this product UL listed?

This product is UL Listed meaning it has been tested and certified by Underwriters Laboratories to meet established safety standards.