satco/nuvo

This 3-3/4" check ring locks a glass shade or diffuser against a fixture body via a 1/8 IP slip thread, holding the glass square and preventing rot...

Unfinished steel check ring with a straight edge and 1/8 IP slip, used as a finishing washer or retention ring in lamp assembly. The 4" diameter an...

This 4-1/4" check ring locks a glass shade or diffuser against a fixture body via a 1/8 IP slip thread, holding the glass square and preventing rot...

SATCO/NUVO Steel Finial 1/4-27 1 Inch Brass Plated (90-136)

SATCO/NUVO Steel Finial 1/4-27 1 Inch Diameter Nickel Plated (90-2454)

SATCO/NUVO Steel Finial 1/4-27 1-1/2 Inch Brass Plated (90-137)

SATCO/NUVO Steel Finial 1/4-27 1-1/2 Inch Diameter Nickel Plated (90-2455)

SATCO/NUVO Steel Finial 1/4-27 1/2 Inch Brass Plated (90-139)

SATCO/NUVO Steel Finial 1/4-27 1/2 Inch Diameter Nickel Plated (90-2453)

SATCO/NUVO Steel Hexagon Head Nipple Brass Plated 1/8 IP 1/2 Inch X 5/8 Inch Overall (90-638)

SATCO/NUVO Steel Hexagon Head Nipple Brass Plated 1/8 IP 1/4 Inch X 3/8 Inch Overall (90-636)

SATCO/NUVO Steel Hexagon Head Nipple Brass Plated 1/8 IP 3/8 Inch X 1/2 Inch Overall (90-637)

SATCO/NUVO Steel Hexagon Head Nipple Brass Plated 1/8 IP 5/8 Inch X 3/4 Inch Overall (90-639)

SATCO/NUVO Steel Knurled Head Thumb Screw 6/32-1/2 Inch Length Antique Brass Plated Finish (90-1155)

SATCO/NUVO Steel Knurled Head Thumb Screw 6/32-1/2 Inch Length Brass Plated Finish (90-1154)

SATCO/NUVO Steel Knurled Head Thumb Screw 6/32-1/2 Inch Length Nickel Plated Finish (90-1156)

A steel knurled head thumb screw in 8/32 thread with a 1" length, finished in brass plate. The longer 1" shank reaches through deeper hardware than...

A steel knurled head thumb screw in 8/32 thread with a 1" length, finished in nickel plate. The longer shank reaches through deeper hardware than a...

A steel knurled head thumb screw in 8/32 thread with a 1/2" length, finished in antique brass. The aged brass tone reads as authentic on traditiona...

A steel knurled head thumb screw in 8/32 thread with a 1/2" length, finished in black. The black finish disappears against dark fixture hardware an...

A steel knurled head thumb screw in 8/32 thread with a 1/2" length, finished in brass plate. The knurled head lets the screw be driven by hand with...

A steel knurled head thumb screw in 8/32 thread with a 1/2" length, finished in nickel plate. The knurled head allows hand-tightening for shade, ha...

SATCO/NUVO Steel Knurled Head Thumb Screws 8/32-1/2 Inch Length White Finish (90-1778)

Steel knurled-head thumb screws in an antique brass-plated finish, sized 8/32 with a 3/4-inch shank. The knurled head allows hand tightening for ca...