SATCO/NUVO

A slightly longer 3/8 inch body brings this 1/8 IP hex-head nipple to 1/2 inch overall, giving added reach for socket cups, couplings, and canopy a...

For the longer runs shorter nipples cannot cover, this 5/8 inch body 1/8 IP nipple measures 3/4 inch overall, adding stack height between sockets, ...

A steel knurled-head thumb screw in 6/32 thread and 1/2 inch length, finished in antique brass to blend with vintage and traditional lamp hardware....

A steel knurled-head thumb screw in 6/32 thread and 1/2 inch length, nickel plated to coordinate with brushed nickel, chrome, and polished nickel h...

A steel knurled head thumb screw in 8/32 thread with a 1" length, finished in brass plate. The longer 1" shank reaches through deeper hardware than...

A steel knurled head thumb screw in 8/32 thread with a 1" length, finished in nickel plate. The longer shank reaches through deeper hardware than a...

A steel knurled head thumb screw in 8/32 thread with a 1/2" length, finished in antique brass. The aged brass tone reads as authentic on traditiona...

A steel knurled head thumb screw in 8/32 thread with a 1/2" length, finished in black. The black finish disappears against dark fixture hardware an...

A steel knurled head thumb screw in 8/32 thread with a 1/2" length, finished in brass plate. The knurled head lets the screw be driven by hand with...

A steel knurled head thumb screw in 8/32 thread with a 1/2" length, finished in nickel plate. The knurled head allows hand-tightening for shade, ha...

1/2 inch knurled-head thumb screws in white-finished steel, threaded 8/32. The knurled head allows hand-tightening without tools, useful at access ...

Steel knurled-head thumb screws in an antique brass-plated finish, sized 8/32 with a 3/4-inch shank. The knurled head allows hand tightening for ca...

Steel knurled-head thumb screws in a brass-plated finish, sized 8/32 with a 3/4-inch shank. The knurled head lets you tighten and loosen by hand fo...

Steel locknut with a brass plated finish, 1/4 IP threaded and a 11/16 inch hexagon flat for a wrench grip. The 1/8 inch thickness gives enough purc...

A standard steel locknut sized for 1/4 IP threaded parts, with an 11/16-inch hex for the larger thread size. Unfinished, ready for hidden installat...

Zinc-plated steel locknut for 1/4 IP threads in a thinner 1/8-inch profile, used when the assembly stack doesn't allow for a full-height nut. Featu...

Brass-plated steel locknut threaded for 1/4 IP, combining the strength of steel with a brass-finish exterior that blends into brass-tone fixtures a...

Unfinished steel locknut sized for 1/4 IP threads, with a 3/4-inch hex and 1/4-inch thickness that handle the load of larger fixture assemblies. Fe...

Zinc-plated steel locknut for 1/4 IP threads, finished to resist corrosion in concealed assemblies and indoor fixture builds. Features Thread: 1/...

A 1/4-20 steel locknut with a zinc plated finish, sized for the standard 1/4-20 thread common to brackets, mounting plates, and heavier fixture har...

A steel hex locknut threaded 1/8 IP for securing lamp pipe, nipples, and threaded hardware in fixture assembly and lamp repair work. The brass-plat...

Steel hex locknut for 1/8 IP threaded stems and nipples, 1/2 inch across the flats and 1/8 inch thick. Left unfinished for paint, plating, or use i...

Hex steel locknut for 1/8 IP lamp pipe, zinc plated for corrosion resistance. The 1/2" wrench flats give a positive grip with standard tools during...