SATCO/NUVO

A 1-3/8 inch nickel-plated steel check ring with a curled edge and 1/8 IP slip. Sized to dress the joint at a socket cup or shade holder, it adds a...

Finished in nickel plating with a curled rim, this 1/2-inch steel check ring caps the joint between a 1/8 IP socket and the shade it carries. Feat...

A 2 inch steel check ring with a curled edge and 1/8 IP slip center hole. Used in lamp building to conceal the joint between a socket cup and shade...

Nickel plated steel check ring at 3/4 inch diameter with a curled edge and 1/8 IP slip center. The soft brushed-nickel look coordinates with contem...

A nickel plated steel check ring measuring 5/8 inch across, sized to slip over 1/8 IP lamp pipe and blend with silver-tone hardware.Features Stampe...

Curled-edge check ring at 7/8 inch diameter in nickel plated steel with a 1/8 IP slip center. Fits between candelabra and medium-base socket sizes ...

A 1 inch steel check ring with a curled edge and 1/8 IP slip fit, useful as a shade retainer or decorative cap on standard lamp pipe.Features Stamp...

This 1-1/2 inch steel check ring pairs a curled edge with a 1/8 IP slip fit, left raw for on-site painting or plating.Features Stamped steel constr...

Sized at 1-1/4 inch diameter with a curled edge, this steel check ring slips over 1/8 IP lamp pipe for shade retention or decorative capping.Featur...

This 1-1/8 inch check ring is stamped from steel with a curled edge and a 1/8 IP slip fit, ready for paint or plating.Features Stamped steel constr...

A 1-3/4 inch curled-edge check ring in unfinished steel, sized to slip over 1/8 IP lamp pipe for shade retention and finishing on site.Features Sta...

Steel check ring in an unfinished 1-3/8 inch diameter, curled at the edge and sized for 1/8 IP slip installation.Features Stamped steel constructio...

Cap a lamp pipe assembly with this half-inch steel check ring, curled at the edge and sized to slip over standard 1/8 IP nipples without threading....

Curled-edge steel check ring measuring 2 inch in diameter, sized to slip over 1/8 IP lamp pipe with a rounded decorative profile.Features Stamped s...

Curled-edge steel check ring in a 3/4 inch diameter, sized to slip over 1/8 IP lamp pipe and left unfinished for custom coating.Features Stamped st...

This 5/8 inch steel check ring pairs a curled edge with a 1/8 IP slip fit, ready to be painted or plated to match the surrounding fixture.Features ...

Measuring 7/8 inch across, this curled-edge steel check ring slips over 1/8 IP lamp pipe and is left unfinished for painting or plating.Features St...

A 1-3/4 inch steel check ring with a straight edge and the wider 1/4 IP slip fit, useful in heavier lamp assemblies with larger pipe.Features Stamp...

This 3 inch steel check ring features a straight edge and the wider 1/4 IP slip fit, sized for larger fixture builds and heavier assemblies.Feature...

A 2-3/4" steel check ring with a curled straight edge and 1/8 IP slip, finished in antique brass. Used to secure a shade or glass diffuser against ...

A 1-1/2 inch straight-edge check ring in brass plated steel, used to cap or position lamp parts along a 1/8 IP threaded pipe. A dependable spare fo...

Sized at 1-1/4 inch diameter with a 1/8 IP slip center, this steel check ring provides a clean stop against a threaded lamp pipe during socket, sha...

Brass plated steel check ring at 1-3/4 inch diameter with a straight edge and 1/8 IP slip center. Fills the gap between a shade holder or socket an...

Steel check ring measuring 1-5/8 inch across with a straight edge and 1/8 IP slip center, brass plated to match traditional lamp hardware. Slides o...