SATCO/NUVO

Support the longest pendant drops and floor lamp stems with this 54 inch 1/8 IP threaded steel nipple, machined from solid steel and plated yellow ...

Full 1/8 IP threading runs the entire 6 inch length of this yellow zinc plated steel nipple, giving lamp builders freedom to position couplings, ch...

A 6-1/2 inch 1/8 IP steel nipple in yellow zinc plated finish, sized for larger lamp bodies and floor-lamp joints that need more than the standard ...

Extend a lamp assembly across seven full inches with a 1/8 IP steel nipple in yellow zinc plated finish. Long enough to span tall bases or link sep...

Steel construction and yellow zinc plating carry this 7-1/2 inch 1/8 IP nipple through the harder wear points of floor lamp assemblies and long clu...

A 7/8 inch length 1/8 IP nipple in yellow zinc-plated steel, sized for slightly taller stack-ups on lamp bases and neck kits. The full-length threa...

Eight inches of 1/8 IP steel nipple in yellow zinc plated finish, giving lamp builders serious reach for tall floor lamps, urn-style bases, and sta...

The 8-1/2 inch length of this 1/8 IP steel nipple lands between standard 8 and 9 inch sizes for lamp builds that need a precise mid-point reach. Ye...

For the tallest lamp builds, this 9 inch 1/8 IP steel nipple in yellow zinc plated finish stretches sockets and hardware to full-length reach. Thre...

Push a lamp assembly nearly a full ten inches with a 9-1/2 inch 1/8 IP steel nipple in yellow zinc plated finish. Threaded through the full length ...

One inch zinc plated steel nipple in 1/8 IP with running thread from end to end. Long enough to bridge check rings and canopies with washers betwee...

One-and-a-half inch 1/8 IP steel nipple, zinc plated with running thread end to end. A staple on the bench for socket-to-vase connections, harp bas...

Short 1-1/4 inch 1/8 IP nipple in zinc plated steel, the go-to length for compact joints between canopies, hickeys, and sockets on pendants and swa...

Steel nipple at 1-1/8 inch, 1/8 IP with running thread the full length and finished in zinc plate. Small-increment sizing between the 1 inch and 1-...

Short 1-3/4 inch 1/8 IP steel nipple in zinc plate, sized for tight joints between sockets, couplings, and canopies. The 3/8 inch diameter matches ...

Zinc plated 1/8 IP steel nipple at 1-3/8 inch with running thread the full length. Fills the gap between 1-1/4 inch and 1-1/2 inch stack builds whe...

A short 1/8 IP steel nipple at 1-5/8 inches, threaded both ends and zinc plated. Sized for close-coupling work: attaching sockets to lamp caps, joi...

Steel nipple at 1-7/8 inch, 1/8 IP running thread and zinc plated. A slightly longer option for lamp builders whose stack needs just under two inch...

Compact half-inch 1/8 IP steel nipple, zinc plated with running thread from end to end. Bulk-packed for lamp assembly benches where short nipples c...

A 10-inch zinc-plated steel nipple threaded 1/8 IP for connecting lamp pipe, sockets, canopies, and hardware where added length is needed in fixtur...

Zinc-plated steel nipple threaded 1/8 IP at both ends, cut to 11 inches for extended lamp bodies, tall candlestick fixtures, and pendant assemblies...

A 1/8 IP steel nipple in zinc-plated finish, the standard threaded nipple used throughout lamp and fixture assemblies for socket, harp, and canopy ...

Twelve inch length of 1/8 IP steel nipple, zinc plated end to end and threaded the full length for cut-to-fit stem work. A staple in lamp shops for...

The 14-inch length in this 1/8 IP steel nipple lineup, threaded end to end and finished in zinc plate for a bright silver appearance. Sized for flo...