SATCO/NUVO

Full three feet of 1/8 IP steel nipple with running thread across the entire length, delivered unfinished for shops that plate, paint, or powder-co...

One-inch 1/8 IP steel nipple with a yellow zinc-plated finish, long enough to bridge a deep canopy or clear a stacked check ring and washer assembl...

Extended 1-1/2 inch 1/8 IP steel nipple, yellow zinc-plated, for lamp assemblies that need extra depth through a thick canopy or a stacked hardware...

Steel 1/8 IP nipple in a 1-1/4 inch length with a yellow zinc-plated finish, the go-to size for deeper canopy stacks and thicker neck hardware. Cor...

A 1-3/4 inch length 1/8 IP steel nipple in yellow zinc plate, for lamp builds that stack multiple pieces of hardware on a single threaded shaft. Co...

Half-inch length 1/8 IP steel nipple with a yellow zinc-plated finish, one of the most common building blocks in lamp and fixture assembly. Threads...

Extend socket assemblies and cluster bodies with this 10 inch threaded steel nipple, machined with standard 1/8 IP threads on both ends for reliabl...

At 10-1/2 inch, this 1/8 IP steel nipple bridges the half-inch gap between shorter stock lengths for lamp assemblies that call for a specific reach...

Machined from solid steel and threaded 1/8 IP on both ends, this 11 inch nipple gives lamp builders and restorers a rigid backbone for socket stems...

Yellow zinc plating over machined steel gives this 11-1/2 inch 1/8 IP nipple a warm gold-tone finish alongside corrosion resistance, making it a fi...

Cut with standard 1/8 IP threads on both ends, this 12 inch steel nipple is a workhorse length for lamp builds calling for a full foot of rigid ste...

For lamp assemblies and DIY lighting builds that need a stem just past twelve inches, this 12-1/2 inch 1/8 IP steel nipple threads directly into st...

Thirteen inches of threaded 1/8 IP steel, plated in yellow zinc for corrosion resistance and a warm gold-tone appearance suited to visible hardware...

Connect sockets, canopies, cluster bodies, and bases with this 13-1/2 inch 1/8 IP steel nipple, threaded on both ends for direct mating with standa...

Solid steel construction and standard 1/8 IP threading on both ends make this 14 inch nipple a dependable stem for taller table lamps and column-st...

A 14-1/2 inch stem for lamp assemblies that need just over a foot of rigid, threaded steel between components — plated yellow zinc for corrosion re...

Finished in yellow zinc for corrosion resistance and a warm gold tone, this 15 inch 1/8 IP steel nipple works as a structural stem for floor lamps,...

Standard 1/8 IP threads on both ends let this 15-1/2 inch steel nipple mate directly with sockets, harps, canopies, and other lamp hardware built t...

Extend a lamp stem or bridge components sixteen inches apart with this 1/8 IP threaded steel nipple, plated in yellow zinc for corrosion resistance...

This 16-1/2 inch nipple falls between common half-inch increments and delivers a rigid, 1/8 IP threaded steel stem for lamp assemblies requiring th...

Machined from steel and finished in yellow zinc, this 17 inch 1/8 IP nipple threads into standard sockets, canopies, harps, and cluster bodies for ...

Seventeen and a half inches of threaded steel stem for floor lamps, tall table lamps, and pendant assemblies that need a specific reach past shorte...

Reach a full 18 inches between socket and base with this 1/8 IP threaded steel nipple, machined for standard lamp hardware and plated in yellow zin...

Yellow zinc plating over solid steel gives this 18-1/2 inch 1/8 IP nipple both corrosion resistance and a warm gold-tone finish for lamp builds whe...