Fixture Accessories

Half-inch 1/4 IP steel nipple in zinc plate, running thread the full length. The heavier 1/4 IP thread is the standard for larger fixtures, ceiling...

Four inch zinc plated steel nipple in 1/8 IP, running thread the full length. At this length the nipple starts to serve double duty as a short stem...

Three-and-a-half inch 1/8 IP steel nipple in zinc plate, running thread across the length. Bridges deep vase caps, tall bases, and stacked hardware...

Zinc plated 1/8 IP steel nipple at 3-1/4 inch with running thread the full length. A common length for taller lamp base and canopy stacks where thr...

Two inch zinc plated steel nipple in 1/8 IP with running thread across the length. Long enough to stack multiple washers, check rings, and locknuts...

Zinc plated steel nipple at 2-1/4 inch, 1/8 IP with running thread the full length. Sized for lamp base builds that stack a vase cap, washer, base,...

Steel nipple at 1-7/8 inch, 1/8 IP running thread and zinc plated. A slightly longer option for lamp builders whose stack needs just under two inch...

One-and-a-half inch 1/8 IP steel nipple, zinc plated with running thread end to end. A staple on the bench for socket-to-vase connections, harp bas...

Zinc plated 1/8 IP steel nipple at 1-3/8 inch with running thread the full length. Fills the gap between 1-1/4 inch and 1-1/2 inch stack builds whe...

Steel nipple at 1-1/8 inch, 1/8 IP with running thread the full length and finished in zinc plate. Small-increment sizing between the 1 inch and 1-...

Eight inch length of brass plated steel pipe, 1/8 IP threaded 3/4 inch on each end for direct connection into socket caps, canopies, and loops. A g...

Short four inch brass plated steel pipe, threaded 3/4 inch on both ends in standard 1/8 IP, sized for compact stem work in flush-adjacent pendants ...

Full three feet of 1/8 IP steel nipple with running thread across the entire length, delivered unfinished for shops that plate, paint, or powder-co...

Twelve inch length of 1/8 IP steel nipple, zinc plated end to end and threaded the full length for cut-to-fit stem work. A staple in lamp shops for...

Zinc plated steel nipple in 1/8 IP, threaded the full 30 inch length so builders can cut and use any segment for stems, risers, or hanging assembli...

Fourteen inches of brass plated steel pipe with 3/4 inch threading on each end, giving fixture builders and lamp repair techs a longer stem option ...

Steel lamp pipe at 12 inch, brass plated and threaded 3/4 inch on both ends, sized for taller stem-mounted fixtures where a foot of drop or riser i...

Ten inch brass plated steel pipe threaded 3/4 inch on both ends, standard 1/8 IP hardware for stem-mounted fixtures, chandelier assemblies, and lam...

Zinc-plated steel nipple with 1/4 IP threading on both ends, used for joining lamp bodies, extending mounting stems, or building up threaded assemb...

Five-inch length of 1/4 IP threaded steel nipple in a zinc-plated finish. A go-to length for stacked lamp cluster bodies, longer canopies, and any ...

Four-inch length of 1/4 IP threaded steel nipple with a zinc-plated finish. A common size for reaching through cluster bodies, canopies, and multi-...

Short 1-1/4 inch 1/8 IP nipple in zinc plated steel, the go-to length for compact joints between canopies, hickeys, and sockets on pendants and swa...

Short 1-3/4 inch 1/8 IP steel nipple in zinc plate, sized for tight joints between sockets, couplings, and canopies. The 3/8 inch diameter matches ...

Steel 1/8 IP nipple at 6 inches, zinc plated for corrosion resistance and one of the most-used lengths for connecting canopies, couplings, and sock...