Fixture Accessories

A 1-3/8 inch steel check ring finished in brass plating, sized to slip over 1/8 IP lamp pipe and coordinate with warm-tone hardware.Features Stampe...

Curled-edge steel check ring in a 1-1/4 inch diameter with the wider 1/4 IP slip fit, sized for heavier lamp pipe assemblies.Features Stamped steel...

Sized at 1-1/4 inch diameter with a curled edge, this steel check ring slips over 1/8 IP lamp pipe for shade retention or decorative capping.Featur...

This 1-1/8 inch check ring is stamped from steel with a curled edge and a 1/8 IP slip fit, ready for paint or plating.Features Stamped steel constr...

Steel check ring in a 1 inch diameter with the wider 1/4 IP slip fit, curled at the edge and left unfinished for finishing to match the fixture.Fea...

A 1 inch steel check ring with a curled edge and 1/8 IP slip fit, useful as a shade retainer or decorative cap on standard lamp pipe.Features Stamp...

Measuring 7/8 inch across, this curled-edge steel check ring slips over 1/8 IP lamp pipe and is left unfinished for painting or plating.Features St...

Retain a shade or cap a nipple with this 3/4 inch steel check ring, machined with a wider 1/4 IP slip fit for heavier lamp assemblies.Features Stam...

Curled-edge steel check ring in a 3/4 inch diameter, sized to slip over 1/8 IP lamp pipe and left unfinished for custom coating.Features Stamped st...

This 5/8 inch steel check ring pairs a curled edge with a 1/8 IP slip fit, ready to be painted or plated to match the surrounding fixture.Features ...

A nickel plated steel check ring measuring 5/8 inch across, sized to slip over 1/8 IP lamp pipe and blend with silver-tone hardware.Features Stampe...

Cap a lamp pipe assembly with this half-inch steel check ring, curled at the edge and sized to slip over standard 1/8 IP nipples without threading....

A brass-plated steel check ring with a curled edge, sized at 1/2 inch diameter and threaded 1/8 IP slip. Check rings sit between socket assemblies ...

Tall light duty harp at 12-1/2 inch, finished in polished nickel — sized for oversized floor-lamp shades and torchiere replacements between standar...

At 13-1/2 inch, this is the tallest light duty harp in the standard nickel range, built for oversized lamp shades that need significant clearance o...

An 11-1/2 inch light duty harp for floor lamps and larger table lamps where shade clearance falls between standard 11 and 12 inch heights. Polished...

Half-step between 10 and 11 inch standard sizes, this 10-1/2 inch light duty harp gives shade replacements an exact-fit option when neither full-in...

The 9-1/2 inch light duty harp bridges 9 and 10 inch standard sizes, useful when a shade swap sits just slightly high or low on either option. Poli...

Polished nickel light duty harp at 8-1/2 inch height, filling the gap between 8 and 9 inch sizes for shade replacements that don't fit either stand...

Light duty harp at 7-1/2 inch — the half-step between 7 and 8 inch sizes when a replacement shade sits the wrong height on either standard option. ...

The smallest of the standard light duty range at 6-1/2 inch, this harp is sized for compact table lamps and small accent lamps where a 7 inch harp ...

The 13 inch light duty harp is the tallest in the standard range, designed for oversized floor lamps and large-shade table lamps. Polished nickel s...

Tall 12 inch light duty harp, polished nickel finish, sized for floor lamps and torchieres where larger shades need substantial clearance. The 1/8 ...

Floor-lamp height light duty harp at 11 inch, finished in polished nickel — suited to taller standing lamps where the shade needs to sit well above...