SATCO/NUVO

A short G5 base T5 lampholder with slide-on rotary-locking mounting, sized for rapid-start T5 fluorescent applications. The compact 7/8" wide body ...

A 72" running-thread steel nipple with a 1/4 IP thread and zinc-plated finish, used as a long threaded rod in lamp and fixture assembly. Cuts to le...

A 4-pin ballast and socket combination built for GU24 lamps, fitted with quick-wire terminals and a 1/8 IP hickey for fixture mounting. Twenty-four...

A GU24 socket cap with quick-wire terminals and a U-channel 1/8 IP hickey, supplied with 24" of lead wire. Designed for OEM use in GU24 fixture bui...

An unglazed porcelain medium-base socket with an integral L-bracket for direct surface mounting via an 8/32 threaded hole. The CSSNP screw shell ha...

A porcelain R7S halogen socket built for double-ended halogen lamps, with 6" SF-1 200°C high-temperature leads and a 1-1/8" mounting nipple. The 16...

A GU24 threaded cap with a 1/8 IP ring and 60" of pre-attached lead wire, intended for OEM use where a GU24 base socket needs to be combined with a...

A white medium-to-GU24 socket reducer that converts an E26 medium-base socket to a GU24 twist-lock base, allowing GU24 lamps to be used in standard...

A keyless paper-lined porcelain socket built for 4KV service, with captive mounting screws, two integral wireways, and 48" pre-attached leads. The ...

A keyless smooth porcelain socket with spring contact, engineered for 4KV service and fitted with a 1/8 IP cap for standard pipe-thread mounting. T...

A GU24 four-pin ballast-and-socket combination on a side-mount bracket with a 1/8 bushing and 24" leads, designed for side-fed pendants and housing...

A self-ballasted CFL lamp adapter with a phenolic body and integrated uno ring, converting an Edison-style fixture to accept 26W G24q-3 or GX24q-3 ...

A self-ballasted CFL lamp adapter with a phenolic body and integrated uno ring, converting an Edison-style fixture to accept 18W G24q-2 or GX24q-2 ...

A self-ballasted CFL lamp adapter with a phenolic body and integrated uno ring, converting an Edison-style fixture to accept 13W G24q-1 or GX24q-1 ...

A smooth phenolic self-ballasted CFL lampholder that converts an 18W G24q-2 or GX24q-2 four-pin CFL into a wired-in fixture component, with the ele...

A phenolic candelabra socket on a 1/8 IP double-leg inside extrusion with 48" black/white leads, built for octagon-pan ceiling installations and ch...

A lighted on-off phenolic rocker switch with a snap-in bushing and 9" leads, designed for fast installation in lamp and small-appliance application...

A lighted on-off phenolic rocker switch with a snap-in bushing and 9" leads, designed for fast installation in lamp and small-appliance application...

A GU7 porcelain halogen socket with 6" 18-gauge Teflon leads, rated 1000W/250V for high-temperature halogen and HID applications where the lamphold...

A candelabra-base socket pre-wired with an 8-foot #18 SPT-1 white cord set, including an inline switch and plug. The switch sits 17" from the socke...

A candelabra-base socket pre-wired with a 6-foot #18 SPT-1 white cord set, including an inline switch and plug. The switch sits 17" from the socket...

A candelabra-base socket pre-wired with an 8-foot #18 SPT-1 brown cord set, including an inline switch and plug. The switch sits 17" from the socke...

A medium-base on-off turn-knob socket built from 3-piece stamped solid brass in a satin brass finish. The removable knob allows for easy service an...

A single-circuit on-off phenolic rotary switch in a white finish, built for lamp builds and small fixture assemblies where a low-profile rotary con...